Hobbico Accu-Glo MKII Power Panel

The power panel with more...now has MUCH more!

The advanced design of the Accu-Glo MkII Power Panel means more convenience and easier control. Features:

A built-in 300-400mA charger with LED and a mounting lug for attaching a Hot Shot. Provides constant charging of glow starters at the field.
1.5 jacks and a simple adjustment dial allows for automatic glow heat customization to the model; once set, the Accu-Glo MkII automatically maintains proper heat, regardless of the plug's condition.
Green and red LEDs indicate glow heat status; another set of LEDs indicate glow plug continuity – no need to remove plugs from engines for inspection.
A bank of 4 colored LEDs next to the power switch provides a more accurate reading of field battery voltage levels.
12V jacks for connecting electric starters and fuel pumps, and 1.5V jacks for glow plugs. The fuel pump is controlled by simple, color-coded twin "FILL" and "EMPTY" pushbuttons.


Easy-to-use color-coded FILL and EMPTY push button controls for fuel pumps.	Customize your glow heat system to automatically adjust itself to changing conditions. Bright LEDs indicate if your glow plug is delivering the best heat possible.	The Accu-Glo MkII can power almost any of your field devices directly from a 12V battery.

Input Voltage:	11-13V DC
Input Voltage Indicators - Four LEDs:	Green LED #2 = 12.5V or more Green LED #1 = 12.0V or more Amber LED = 11.5V or more Red LED = 11.0V or more
Starter Jacks-Output Voltage:	12V DC
Fuel Pump Controls:	yellow “FILL” pushbutton red “EMPTY” pushbutton
Glow Heat Power Circuit:	automatic 1.5V heat adjustment
Glow Heat Status Indicators:	green LED = “HOT” glow heat red LED = “COLD” glow heat
Glow Heat Continuity Indicators:	green LED = “GOOD” plug continuity red LED = “BAD” plug continuity
Glow Starter Charger Current:	300-400mA constant current (not timed)
Glow Starter Output Jack:	glow starter mounting lug w/LED
Case Size:	6.0 x 3.7 in (152 x 94 mm)
Weight:	8.3 oz (235 g)

Stock Number: HCAP0306